Gloss Lovers Kit
Save BIG and arm yourself with the amazing high-gloss CARPRO Reload nano sealant, CARPRO Ech2o Waterless Wash & Quick Detailer, as well as critically acclaimed Microfiber Madness Crazy Pile towels and a Microfiber Madness Slogger for application of Reload!
Kit Includes:
(1) CARPRO Reload 500 ml - CARPRO Reload 2.0 packs the glass-like gloss, hydrophobicity, and dirt repellency of silica nanotechnology in a convenient spray-on, wipe-off sealant.
(1) CARPRO Ech2o Concentrate 500 ml - Dilute 1:20 for a quick detailer
(2) Microfiber Madness Crazy Pile Towel 16" x 16"
(1) Microfiber Madness Slogger Towel 16"x 16"
Instructions:
Reload Application:
- Do not apply in direct sun.
- Apply in good ambient lighting.
- Shake well.
- Spray 2 sprays directly onto a Slogger Towel or directly on the paint and spread out left and right and then up and down over a 2 to 2.5 sqft area.
- Work it into the paint evenly until almost flashed away.
- Switch to a fresh clean towel Crazy Pile Towel and buff the area until no residue remains.
- Check after each panel before moving to next.
Tips:
- For maximum durability, paint should be completely clean and free of oil, solvents, or wax before applying Reload.
- Do not apply in direct sun.
- In case of uneven areas do to improper application or applying too thick, wipe off Reload with Eraser or IPA immediately and re-apply.
- Magic Elixir Formula: Mix 50ml of CARPRO Ech2o, 50ml of CARPRO Reload and 400ml of distilled water in a 16 oz bottle.
Ech2o Application:
- Quick Detailer:
- Shake well and dilute 1:20 (0.8 oz of Ech2o with 15.2 oz of distilled water in a 16 oz bottle)
- Spray, spread, and wipe off completely.
- Waterless Wash:
- Shake well and dilute at a 1:10 to 1:15 ratio.
- For a 16 oz bottle at a 1:10 ratio, mix approximately 1.5 oz of ECH2O with 14.5 oz of distilled water.
- For a 16 oz bottle at a 1:15 ratio, mix approximately 1 oz of ECH2O with 15 oz of distilled water.
- Spray liberally across one entire panel.
- Lightly wipe with Crazy Pile towel, flipping the towel to fresh sides often.
- Spray once more across the panel surface.
- Using a fresh Crazy Pile towel wipe the surface, removing the remainder of dust and dirt.
- Move to the next panel, repeat steps 2-5, and continue around the vehicle.
- Final wipe the entire vehicle with a fresh clean towel as needed.
- Rinse-less Wash:
- Mix 3 gallons of water with 2-3 ounces of Ech2o in a bucket with Grit Guard.
- Fill another 5 gallon bucket with grit guard and ONLY clean water.
- Submerge Crazy Pile Microfiber Towel in the solution bucket.
- Fold Towel in half and drag slowly across surface no pressure across 1/4 of a panel.
- Flip Towel and do a couple other passes on the next 1/4 of panel.
- Flip Towel In side out and repeat using all 4 sides to complete one panel.
- Use a separate clean soaked towel for final buffing wipe.
- Use a DRY Summit 800 or suitable drying towel to dry the panel completely before moving on to next panel.
- Wash the dirty towels in your rinse bucket OR use a new towel submerged and repeat steps 3-8.
- Wash all towels in the washing machine with your favorite microfiber detergent when complete.
Precautions:
- Test the product on an inconspicuous area before use.
- Store in a cool, dry place.
- Keep away from children.
- Do not ingest.