IK e Foam Pro 2 Professional Electric Sprayer
No longer do you need a pressure washer to foam your vehicle, all you need is IK Foam Sprayers!
The IK e Foam Pro 2 Professional Electric Sprayer elevates your cleaning game with its ability to produce dense, long-lasting foam, making it ideal for disinfecting upholstery, revitalizing carpets, and foaming your vehicle’s exterior. What makes the Ik e Foam Pro 2 truly unique is its innovative built-in battery compressor, which eliminates the need for manual pumping—though you can still manually pressurize the tank if you prefer! According to IK, the battery compressor can dispense foam for 8 to 10 full tanks of liquid before needing a recharge, ensuring efficiency and convenience for all your cleaning tasks.
Designed for use with chemical agents with surfactant properties (surface active). Dilute your favorite APC, Car Wash Soap or Iron Remover depending on the task at hand. Provided with the electric foam sprayer are 3 color coded adaptors for different types of foam production (dry, wet or standard foam).
Features of the IK e Foam Pro 2 Electric Professional Sprayer:
- Resistant to most acids and solvents (pH 1-11, Check Chemical Product Table).
- 3 bar safety valve with depressurization option.
- Large opening for easy filling and cleaning.
- Innovative and ergonomic design.
- Strong translucent tank with level indicator.
- Base for greater stability.
- Safety lock.
- Protective sleeve for valve chamber.
- Easy assembly and taking apart for cleaning and maintenance, tool free.
- Special “foam” even fan type nozzle.
- Color coded caps included to identify contents of sprayer and for nozzle storage.
- Comes with three (3) Color-Coded Mixer Adaptors! Creates your choice of dry, wet, OR standard foam.
- Orange: Very wet foam
- Green: Very dry foam
- Grey: Standard foam
Specifications:
- Maximum pressure of the electric foam sprayer: 3 bar – 43.5 psi
- Net weight: 1.54 lb
- Gross weight: 1.23 lb
- Useful capacity: 42 oz (1.25 L)
- Total capacity: 64 oz (1.9 L)
- Battery: 7.4v 3200mAh
Can be used with products such as:
- CARPRO Reset
- CARPRO Descale
- CARPRO Hydro2 Foam
- CARPRO MultiX Limited
- CARPRO Lift - Limited
- CARPRO Cleanse
- CARPRO Inside - Limited
- CARPRO IronX Snow Soap - Limited
- CARPRO Spotless - Limited
- Koch Chemie Gentle Snow Foam
- Koch Chemie Green Star - Limited
- Koch Chemie Pol Star - Limited
- Oberk All Purpose Soap - Limited
- OBSSSSD Auto Wash
- Ultima Paint Guard Wash
Not for use with products such as:
- CARPRO Retyre (Recommended foaming sprayer: CARPRO ReTyre EMPTY 500ml Bottle or SOLO CLEANLine Alkaline Foaming Sprayer)
- CARPRO Bug-Out (Recommended sprayer: IK Multi TR 1 or IK Alkaline)
- CARPRO TarX (Recommended sprayer:IK HC TR 1 Heavy Duty Sprayer 35 oz)
- CARPRO Trix (Recommended sprayer:IK HC TR 1 Heavy Duty Sprayer 35 oz)
Instructions:
- Unscrew the IK e Foam Pro 2 Professional Electric Sprayer’s head by turning it anti-clockwise.
- Fill the tank with water to the indicated maximum of 1,25L – 42 oz.
- Pour the foaming product.
- Screw tightly to close.
- Turn the electric foam sprayer on by holding the power button for 3 secs.
- Press the power button once to pressurize the device. For a good quality foam it is important to pressurize until the valve clicks or pops out.
- To begin spraying, make sure the safety lock is off. Press the handle and, as you work, compensate for the loss in pressure by making more passes.
- Once the work is finished, activate the safety lock on the IK e Foam Pro 2 and release the pressure by pulling the safety valve.
- If more than one appliance is used with different chemicals, use the identification marker to identify the contents of each appliance by placing it on the end of the handle. To remove it, pull it in the direction shown by the arrows using a tool or pointed instrument.
Cleaning and Maintenance:
- After each use, depressurize the electric foam sprayer.
- Collect and dispose of the residual amount according to the legislation, prescriptions, and applicable regulations.
- Clean the appliance with water.
- In the event of obstruction of the nozzle, clean it with water and do not use metallic objects.
- In order to prolong the life of the joints, regularly apply some drops of oil or grease on the moving parts.
- To access the valve chamber, remove the cylinder guard by pulling it firmly.
