CARPRO TarX 1 Liter (34oz)
Professional strength tar remover
Warning: This product will not be shipped to and is not for sale or use in the State of California. If you use or sell this product in the state of California you accept full responsibility per California law. LOW VOC version suitable for California can be found here - TarX LOW VOC 1L
Tar happens. Road construction, highway miles, summer asphalt… it finds a way. And when it bonds to your paint, it doesn’t just look bad; over time, it can degrade the surface and make washing a nightmare.
CARPRO TarX 1 Liter (34 oz) is the pro-grade tar remover trusted in shops and garages for one reason: it just works. Spray it on, let it dwell, and watch stubborn tar and asphalt soften so they wipe away without heavy scrubbing or risk to your finish.
For more than just tar, TarX also tackles insects, tire marks, adhesives, and traffic film, helping you reset the surface before polishing, coating, or waxing. A clean, decontaminated surface means better adhesion, better durability, and a better final result.
Simple process, serious results. Spray, dwell, wipe.
If a spot fights back, apply TarX to a microfiber and lift it with ease.
Paint stays healthy. Surfaces stay slick. Your detail stays elevated.
Features:
- Fast reaction time.
- Easy to use.
- Cuts through heavy tar.
Precautions:
- Avoid sensitive plastics and acrylic paint.
- Do not use TarX in direct sun or hot surface.
- Do not allow to dry on surface.
- Work in a well ventilated area.
- Test the tar remover in a hidden area before use.
- Avoid long term exposure to skin.
- Avoid contact with eyes.
Directions:
- Shake the CARPRO TarX 1 Liter (34 oz) container.
- Spray onto dry,cool surface or brush/wipe on and allow product to dwell for up 2 mins.
- Wipe off residue.
- Reapply as needed.
- When complete clean area with CARPRO Ech2o or CARPRO Reset.
- If applying TarX to PPF, exercise caution and work on a cool, small section at a time. Do not to let it sit for longer than 30 seconds. Rinse off thoroughly with soap or waterless wash afterward. Repeat the process if needed.
- If using on a Sealant or wax, please note TarX will most likely affect some of the properties of these products and they will need to be reapplied after neutralizing the TarX.
