CARPRO Inside Leather & Interior Cleaner 

Interior cleaner with a kick!

Introducing CARPRO Inside! An excellent cleansing solution infused with organic essentials for vehicle interiors of many shapes and sizes! Inside is specially formulated to clean vinyl, plastic, finished leather, and a variety of interior surfaces! Utilizing a high foaming mix of proprietary surfactants and gentle detergents, CARPRO Inside is able to easily remove built-up dirt, sweat, oils, and all manner of soiling on interior surfaces. The heavy foaming action allows perfect saturation of heavy dirt even when using a brush, while the strong cleaners allow you to cut it 1:5 for typical soiling. Use as is for extra-strength interior cleaning.

Features:

• High foaming action
• Safe on most surfaces
• Dilutable for typical soiling
• Fresh welcome (not overly powerful) scent
• Infused with organic essentials
• pH 12
• Available in 50 ml, 500 ml, 1000 ml, and 1 gallon

Recommended Surfaces:

• Finished leather
• Vinyl
• Plastic interior surfaces
• Wood interior trim
• Rubber mats
• Alcantara
• Upholstery

Precautions:

• Do not spray directly on leather or sensitive surfaces.
• Do not spray directly on warm surfaces or on surfaces in direct sun.
• Do not ingest.
• Keep out of reach of children.
• Do not leave on the surface for more than 5 mins, and do not leave to dry on the surface.
• Test in an inconspicuous area before use.
• On more sensitive materials, spray on your cleaning towel and then apply to the surface, work in, and buff off.

Directions:          

*CARPRO Inside can be used straight for heavy cleaning or diluted 1:5 for typical soiling or lighter cleaning.

1. Shake well and spray over a microfiber towel
2. Apply to affected areas with the microfiber towel.
3. Agitate with a brush, cleaning pad, or towel as needed.
4. Wipe off any remaining residue with a separate damp towel.

Cleaning Alcantara:

*Dilute CARPRO Inside to a dilution ratio of 1:10.

1. Check for color fastness on an inconspicuous area.
2. Spray fine mist onto surface.
3. Rub gently with a soft cloth in small circular motions.
4. Wipe with a water-damped cloth to remove excess residue.