Geist. Ink & Dye Remover 200 ml

Ink and Dye remover for Leather, PVC and PU

Geist Ink & Dye Remover is a targeted cleaner designed to safely remove ink, pen marks, and dye transfer from leather, PU, and PVC surfaces without damaging the finish. Its plant and algae-derived formula delivers strong cleaning performance without the use of harsh solvents, making it safe for delicate, coated materials.

Unlike aggressive cleaners that can swell or weaken surface coatings, this remover works by breaking down contamination so it can be lifted away with minimal agitation. It will not alter the gloss or matte appearance of the surface, preserving the original look and feel.

Ideal for automotive interiors, furniture, and coated synthetic materials, it provides an effective, low-risk solution for removing stubborn stains while maintaining surface integrity

Directions:

• Do not use on suede, nubuck, microfiber, or absorbent surfaces such as aniline leather. 
• Always test on an unseen area before use.
• The effectiveness of the remover depends on the time it can work on the pen mark or dye stains. Longer is better. 

TO REMOVE PEN MARKS

1. Remove stains without delay. Do not clean or wet the surface before applying Geist. Ink & Dye Remover.
2. Apply the remover directly onto the pen marks or spread with a cloth, then leave it to lift the color for at least 30 minutes, longer for older stains.
3. Some heavy or older staining may need an overnight treatment.
4. Many dyes visibly swim to the surface of the remover liquid; others may need some rubbing with a cotton swab to lift them from the grain. The cotton swab will absorb the dye as it loosens it. Wipe off the ink remover with a dry, absorbent cloth and repeat the treatment if needed.
5. When the pen mark or dye is no longer visible, clean the surface with Geist. Rapid Leather & Vinyl Cleaner or a moist cloth and leave to dry.
6. Finally, protect the surface with Geist. Dye & Friction Blocker or Geist. Repel to prevent future discolorations and friction damage. 

TO REMOVE DYE TRANSFER & OTHER STAINS

• Allowing this product time to work and lift the stains is key to not damaging the surface.
• DO NOT RUB. This can damage the top coat.
• Apply the product and wait. In some cases, multiple treatments over several days might be needed. 
• The above before and after photos are from a heavily stained leather seat in a 2023 Porsche 911 Carrera. Dye from a sheepskin jacket was transferred onto the leather. This routine was followed for 7 days to remove all the stains. 

STEP 1 - Pour the liquid on a cloth and wipe over the affected area and leave it overnight. The longer the better. 

STEP 2 - The following morning - Clean the affected area gently using Geist. Rapid Leather & Vinyl Cleaner by spraying on a cloth or with a cleaning brush. DO NOT RUB. 

STEP 3 - Repeat the above steps until you achieve the desired result.

Finally, protect the surface with Geist. Dye & Friction Blocker or Geist. Repel to prevent future discolorations and friction damage.