Snow Drift: Edgeless Polish Removal - 16" x 16"
Our "Snow Drift" Microfiber towel is noticeably softer than the average polish removal towel and features a 75/25 blend with a dense loop weave that excels at removing compounds, polishes, or difficult waxes from the surface while remaining entirely paint safe even on soft paint.
- Very Soft
- Paint Safe
- Terry Weave
- Lint Free
- Size: 16" x 16"
- Blend: 75/25
- Gsm: 400
- Edge: Edgeless
- Color: White
- Buy 5 Save 10%
- Buy 10 Save 30%
When caring for microfiber towels there are a few simple rules to live by. Microfiber towels should only be washed with other microfiber towels. If you wash with other types of fabrics like cotton, etc, the microfiber will retain lint from those fabrics. Only use microfiber detergent or liquid detergent that is labeled as free and clear of dies and perfumes. When washing consider a second rinse cycle to remove any remaining detergents if needed. NEVER use fabric softeners or dryer sheets. When drying either hang dry or dry on a very low heat cycle and never leave them in the dryer long enough to heat up. A dry microfiber that is heated to a certain point melts and becomes a danger to paint. Rinsing your new towels in the washer is always a good habit but also be aware that some colors may bleed onto others if you mix colors during that first wash cycle. After use microfiber should be stored, washed, and kept separate according to their task. In other words you would never use a wheel towel and then mix it with your paint towel. Mixing wax and sealant towels with glass and drying towels are a good way to remove absorbency from or cause streaking with your drying towels. Interior or doorjamb towels will collect sand and particles you would never want in your paint buffing towels so keep those separate as well.
Points to Review:
- Do not wash or dry with non microfiber fabrics
- Wash with liquid laundry detergent labeled free & clear or with a microfiber specific washing detergent
- NEVER use fabric softener sheets
- NEVER use a dryer unless you have a sufficiently low heat setting