CARPRO Polishing Pad
The CARPRO Polishing Pad is made of an open cell foam specifically designed for medium polishing on many paint types! The dense elastomeric polymer foam interlayer provides the ability to easily maintain even pressure over curved surfaces whilst allowing vibration to be absorbed BEFORE it reaches the polishing surface. This in turn allows the abrasives to do their job without the vibration affecting performance of finish. The beveled profile allows the face of the pad to contour out away from the backing plate providing an extra level of precaution around tight spots, while the "fast rebound" polishing foam surface makes it ideal for use with both dual action AND rotary machines.
If versatility is important to you, then the CARPRO Polishing Pad is must!
Features:
- Medium-cut polishing foam designed for versatility across multiple paint systems
- Open-cell structure promotes consistent product distribution and controlled polishing action
- Elastomeric interlayer helps maintain flat, even pad pressure on curves and body lines
- Vibration-dampening design improves polishing stability and finish quality
- Enhances abrasive efficiency by reducing unwanted machine chatter on paint
- Beveled edge increases safety in tight areas and reduces risk of backing plate contact
- Fast-rebound foam supports consistent performance under heat and pressure
- Works with both dual action and rotary polishers for flexible use in any detailing setup
- Balanced construction for smoother control, improved correction consistency, and refined finish results
Specifications:
- Foam Color: Orange
- Cut: 5/10 (medium)
- Finish: 8/10 (glossy)
- Quantity: 1
Pad Dimensions:
3" Pad
- Hook & loop diameter: 3 1/8"
- Polishing face diameter: 3 3/4"
- Total thickness: 3/4"
5" Pad
- Hook & loop diameter: 5 1/8"
- Polishing face diameter: 3/4"
- Total thickness: 3/4"
6" Pad
- Hook & loop diameter: 6 1/8"
- Polishing face diameter: 6 3/4"
- Total thickness: 3/4"
Polishing Tips:
- Fasten pad to machine taking care to securely center it on your backing plate.
- Follow polish dependent tips.
- Avoid overworking an area and do not hold pad still in one place.
- When polishing, clean your pad after each section with your foam pad brush before applying a couple more drops of polish for the next section.
