CARPRO ALLiN All-in-One One Step Compound

Polish and Protect

CARPRO ALLiN is a water-based, all-in-one polishing compound designed to correct paint defects, deliver a brilliant high-gloss finish, and seal the paint with a base layer of protection all in a single application.

Engineered to remove swirl marks, light paint defects, and sanding marks up to 2500 grit, ALLiN enhances paint clarity and gloss while simplifying the correction process.

Ideal for high-volume detailers, time-sensitive jobs, and one-step paint enhancements, CARPRO ALLiN combines correction, refinement, and protection into one efficient process. Achieve impressive results in less time with ALLiN.

Features:

• Cutting Power: Removes swirl marks, paint defects, and sanding marks up to 2500 grit.
• All-in-One Performance: Combines paint correction, polishing, and protection in a single application.
• High-Gloss Finish: Enhances paint clarity, depth, and gloss.
• Water-Repellent Protection: Leaves behind a hydrophobic protective layer.
• Time-Saving Formula: Streamlines the detailing process, making it ideal for high-volume shops and one-step paint enhancements.
• DA Polisher Compatible: Formulated for use with dual-action polishers.

Directions:

1. Wash and decontaminate the vehicle.
2. Select a CARPRO Ultra Pad for more cut or CARPRO Orange Pad for less cut based on the hardness of the paint and the severity of the defects. 
3. Apply 3 to 4 pea-sized drops to your pad.
4. Using a dual-action polisher at speed 3.5 to 4, work within an 18×18 inch area.
5. Move the polisher slowly across the surface in a cross-hatch pattern.
6. Polish until the residue turns completely clear.
7. Allow the residue to set on the surface while moving to subsequent sections. 
8. Repeat steps 3–7 on additional sections, cleaning the pad with a brush every other section or as needed.
9. For best protection, wait until 30+ minutes have elapsed to wipe away the residue from previously polished panels using a clean CARPRO 2 Face Towel. Continue polishing the remaining panels, following the same process.

• • Full water repellency after 24 hours.
  • You may add additional hydrophobic protection using CARPRO Reload or EliXir.