CARPRO HydrO2 Foam

Ceramic Sealant & Auto Wash in One Simple Step!

Experience the next level of convenience and protection with CARPRO HydrO2 Foam, a revolutionary product that combines car wash and ceramic sealing in a single, effortless step. Designed with a pH-neutral formula, CARPRO HydrO2 Foam safely lifts and removes dirt from all solid surfaces without compromising your vehicle's finish. Whether you're washing paint, glass, plastic, or wheels, this versatile solution provides a gentle yet effective clean. 

CARPRO HydrO2 Foam is formulated with hydrophilic glass fibers and silicon polymers that bond to your vehicle’s surfaces during use. As you wash, the rich foam not only cleans but also leaves behind a hydrophobic coating that repels water, dirt, and contaminants. The result is a durable, glossy finish that protects against the elements and reduces maintenance time.

CARPRO HydrO2 Foam delivers instant, visible results without any waiting or cure time. Simply rinse, and your vehicle is left with a durable silica shell that locks in a brilliant shine while defending against UV rays, acids, and alkaline cleaners for three months or more. This powerful layer helps slow paint fading and aging, preserving that like-new look while reducing the need for costly repainting down the road. Best of all, HydrO2 Foam applies with ease—no tricky steps, no hassle. With minimal effort, you’ll enjoy maximum protection and a showroom-worthy finish every time you wash.

Features:

• Wash & Protect: Combines cleaning and sealing in one easy application.
• Instant Results: No cure time needed—just wash, rinse, and go!
• pH Neutral Formula: Gentle on all surfaces, including delicate finishes.
• Effortless Dirt Removal: Lifts dirt safely without compromising your paintwork.
• Enhanced Shine: Boosts gloss, depth, and smoothness for a showroom-quality finish.
• Versatile Application: Safe for use on various surfaces.
• Hydrophobic & Dirt Repellency: Repels water and dirt for a cleaner surface longer.
• UV Protection: Shields your vehicle from harmful sun damage.
• Durable Performance: Resists acids, alkaline solutions, and solvents, lasting 3+ months.

Available Sizes:

• 50 ml Sample
• 500 ml
• 1000 ml
• 1 Gallon

Precautions:

• Do not apply CARPRO HydrO2 Foam in the sun or to a hot surface.
• In shaded locations, rinse the vehicle of all grit.
• If the vehicle is extremely dirty, we recommend first washing with CARPRO Reset.

Directions by hand: 

1. Rinse vehicle.
2. Apply a small amount of the product directly to your wet mitt and spread it across one panel.
3. Wash the panel as normal.
4. Rinse the mitt and panel thoroughly.
5. Move to the next panel and repeat steps 2-4.
6. Rinse the entire vehicle well.
7. Dry any remaining water with your favorite CARPRO or Microfiber Madness Drying towel. 

*If you prefer to use it in a wash bucket, CARPRO recommends a 1:20 dilution ratio (6.1 oz of product per gallon of water).

Directions with Foam Cannon or Foaming Sprayer:

1. Dilute CARPRO HydrO2 Foam 1:9 in foam cannon or foam sprayer.
   
• For foamers with a 1000 ml (34 oz) container: 100 ml (3.4 oz) of Hydro2 Foam and 900 ml (30 oz) of water.
• For foamers with a 500 ml (16 oz) container: 50 ml (1.8 oz) of Hydro2 Foam and 450 ml (15 oz) of water.
2. Foam surface working panel by panel. (DO NOT allow soap to dry on the surface).
• If you are in a controlled environment, then it's ok to foam more than a panel at a time, making sure soap does not dry on the surface.
3. Wash with a wash mitt (as usual), making sure to thoroughly rinse the panel.
4. Move on to the next panel, and when the vehicle is finished, rinse the entire vehicle very well, making sure all soap is rinsed off.
5. Remove any remaining water with your favorite CARPRO or Microfiber Madness Drying Towel.
   
6. If the vehicle has been previously washed, then you can skip the contact wash and spray Hydro2 Foam on the surface and immediately rinse. 

Pro Tip: How to Fix CARPRO HydrO2 Foam High Spots/Streaking

Now, let's talk about what to do if you leave CARPRO HydrO2 Foam on the paint too long or if it dries. If you are unsure of what a high spot is, it can be noted as a discoloration or a rainbow effect on parts of the vehicle. This is caused when there is more product in one area that was not rinsed off effectively. It is very undesirable and can take a few weeks to wear away if not attended to immediately. If you need some visuals on this, there is a great section in our HydrO2 Foam Video that shows you exactly what to look for.

• Immediate Fix
• Wipe it off with a quick detailer if addressed within 20 minutes.
• If it doesn't come off, reapply HydrO2 Foam with a mitt and rinse off immediately.
• Delayed Fix
• For older high spots, a light polish may be necessary.

It’s crucial to act quickly if you notice any high spots. The sooner you address them, the easier they are to fix. Using a quick detailer or reapplying CARPRO HydrO2 Foam usually does the trick.