Gloss Lovers Kit
Save BIG and arm yourself with the amazing high gloss CarPro Reload nano sealant, CarPro Ech2o Waterless Wash & Quick Detailer, as well as critically acclaimed Microfiber Madness Crazy Pile towels and a Microfiber Madness Slogger for application of Reload!
Kit Includes:
(1) CarPro Reload 500ml
(1) CarPro Ech2o Concentrate 500ml - Dilute 1:20 for quick detailer
(2) Microfiber Madness Crazy Pile Towel 16" x 16"
(1) Microfiber Madness Slogger Towel 16"x 16"
Instructions:
Reload Application:
- Do not apply in direct sun
- Apply in good ambient lighting
- Shake well
- Spray 2 sprays directly onto a Slogger towel or directly on the paint and spread out left and right and then up and down over a 2 to 2.5 sqft area
- Work it into the paint evenly until almost flashed away
- Switch to a fresh clean towel Crazy Pile towel and buff the area until no residue remains
- Check after each panel before moving to next
- Tips:
- Paint should be completely clean and free of oil, solvents, or wax before applying Reload (For Durability)
- Do not apply in direct sun
- In case of uneven areas do to improper application or applying too thick, wipe off Reload with Eraser or IPA immediately and re-apply.
- Magic Elixir Formula: Mix 50ml of CarPro Ech2o, 50ml of CarPro Reload and 400ml of distilled water in a 16 oz bottle.
Ech2o Application:
- Quick Detailer:
- Shake well and dilute 1:15 ~ 1:25
- Spray, spread, and wipe off completely
- Waterless Wash:
- Shake well and dilute 1:10 ~ 1:15
- Spray liberally across one entire panel
- Lightly wipe with Crazy Pile towel flipping towel to fresh sides often
- Spray once more across panel surface
- Using a fresh Crazy Pile towel wipe surface removing remainder of dust and dirt
- Move to next panel, repeat steps 2-5, and continue around vehicle
- Final wipe entire vehicle with a fresh clean towel as needed
- Rinse-less Wash:
- Mix 3 gallons of water with 2-3 ounces of Ech2o in a bucket with Grit Guard
- Fill another 5 gallon bucket with grit guard and ONLY clean water
- Submerge Crazy Pile Microfiber Towel in the solution bucket
- Fold Towel in half and drag slowly across surface no pressure across 1/4 of a panel
- Flip Towel and do a couple other passes on the next 1/4 of panel
- Flip Towel In side out and repeat using all 4 sides to complete one panel
- Use a seperate clean soaked towel for final buffing wipe
- Use a DRY summit 800 or suitable drying towel to dry the panel completely before moving on to next panel
- Wash the dirty towels in your rinse bucket OR use a new towel submerged and repeat steps 3-8
- Wash all towels in washing machine with Micro-Restore when complete
- Precautions:
- Test product on inconspicuous area before use
- Store in cool dry place
- Keep away from children
- Do not ingest