Solution Finish Black Trim Restorer - 12 oz.
Brings Black Back!
Solution Finish Black Trim Restorer is an incredible product that restores originally black surfaces to a deep, rich black without the"wet look" shine and dries quickly with no greasy residue. It's unique formula combines ancient ingredients with advanced polymer technology to provide a spectacular long-lasting, glossy black protective finish.
Solutions Finish is extremely easy to use (bordering on fool proof). It darkens and restores plastic trim and after removing the excess and allowing it to cure you are left with a completely dry finish. The ingredients within not only restore the plastic but also halt the formation of peroxide gas (stopping oxidation).
- Easy Application
- Dries Quickly
- No Greasy Residue
- VOC Compliant
- Silicone-Free Solution that uses all natural oils
- For exterior use only.
- Wear gloves and eye protection. Solution Finish will stain clothing and skin.
- Make sure area to be treated is clean and dry.
- Shake bottle well and apply a small amount to applicator pad or microfiber sponge.
- Spread a thin coat over area in an even motion, covering area completely.
- Allow Solution Finish to penetrate for at least 1-2 minutes.
- Use a clean microfiber towel to buff off excess.
- For best results do not wash treated area for at least 4 hours.
- For added protection: Apply Ultima Tire and Trim Guard Plus after 1 week.
Tips and Precautions:
- For best results apply at 40 degrees F or above.
- Use adequate ventilation.
- Do not use on painted or glass surfaces; wipe off immediately with a clean applicator pad, terry cloth or Microfiber towel if solution gets on these areas. Use a paint safe cleaner if allowed to dry or as needed.
- Applicator pads can be reused if stored in a sealed plastic bag.
- Store Solution Finish in a cool dry place away from heat or flame.
- Keep bottles tightly closed when not in use.
- Bumpers, pads and trim
- Mud flaps
- Window trim
- Running boards
- Truck bed caps and covers
- Handles and wiper blades