CARPRO Lift Snow Foam 500ml (17oz)

Pre-wash alkyline snow foam

CARPRO Lift is a highly concentrated pre-wash foam agent that dissolves and softens dirt and grime so it can be easily removed during the wash. Suitable for use with all foaming tools, canisters, guns, and pressure washers, CARPRO Lift produces a thick foam designed to prep the most embattled areas of the vehicle. This foam loosens and weakens dirt, allowing you to remove MORE with your rinse. This allows for less of a chance to scratch your vehicle during your contact wash. If you’re making sure your wash is as safe as possible, CARPRO Lift is a must have. 

You can use CARPRO Lift to soften bugs, baked on dirt, and more. This snow foam for car washing is formulated specifically to offer maximum wetting and rinses off easily as well. It is not a superficial high foaming product but has been designed as a true active surface agent. During the panel dwell period, CARPRO Lift’s bubbles soak the hardened debris and allow it to release from the vehicle with ease during the wash. 

Note that CARPRO Lift contains the punch of an all purpose cleaner unless you heavily dilute it. It will strip waxes and some sealants from vehicles if used at a 1:10 ratio. 

Features:

• Highly concentrated.
• CARPRO Lift softens bugs, baked on dirt, and more.
• Perfect pre-wash for use in your foam cannon. 
• Safe for use on CQUARTZ ceramic coatings. 

Specifications:

• pH 10~11.

How to use as a Pre-Wash Solution:

1. Use Lift only on cool surfaces. Do not use in direct sun, or you may end up with streaks on your vehicle. Do NOT allow to dry on surface.
2. Add up to 3 oz of Lift into your 32 oz foam cannon or IK Foam sprayer. You can use leaner ratios for a more flowing mixture or a richer ratio for a denser foam.
3. Allow the product to remain on the surface for a minute or as long as possible without allowing too dry.  
4. Power rinse off.  This completes your Lift Pre-Wash.
5. Wash with CARPRO Reset.

How to use as Single Wash Solution: 

1. Use CARPRO Lift only on cool surfaces. Do not use in direct sun. Do not allow shampoo to dry on the surface!
2. Pre-rinse vehicle with free flowing water to remove loose debris
3. Add up to 3 oz of Lift into your 32 oz foam cannon or IK Foam sprayer. You can use leaner ratios for a more flowing mixture or a richer ratio for a denser foam.
4. Allow the product to remain on the surface for a minute and then wash from the top down using our favorite wash mitts.
5. Its critical to rinse your mitt or sponge periodically in a second bucket filled with clear water or with a hose.
6. After washing, rinse the vehicle thoroughly with free flowing water to remove shampoo residue, and dry with a Microfiber Madness Chipmunk Edgeless, CARPRO DHydrate Drying Towel, or Metro Air Force Master Blaster.

Precautions:

• Do not use the CARPRO Lift Snow Foam 500ml (17oz) in direct sun. 
• Do not allow shampoo to dry on the surface!