Ultima Paint Guard Plus - 4 oz.

Ultima Paint Guard Plus - 4 oz.

Our Price: $19.99
Brand:
SKU:
ULT-1004-100
Availability:
Usually ships within 12 hours

Ultima Paint Guard Plus - 4 oz.

Ultima Paint Guard Plus provides long-lasting protection against detergents, acid rain, road salts, insect remains and UV radiation from the sun. Ordinary waxes and paint sealants cannot offer the same level of protection and wash or wear off in a matter of weeks. Ultima Paint Guard Plus seals and protects for months, not weeks. Apply with the included microfiber applicator in less than 10 minutes with our Wipe-On, Walk Away™ process.

Key Benefits:

  • Protects against the suns UV Radiation
  • Resists bug droppings, acid rain, and other environmental contaminants
  • Boosted by Polycharger®
  • Wipe-On, Walk Away™ process, applies in less than 10 minutes  
  • Extends the life of paint surface
  • Produces a radiant show car shine 
  • Can be layered for incredible "candy shell" gloss appearance

Instructions:

  • Apply to clean, dry car only. For guaranteed results, apply after initial treatment with Ultima Paint Prep Plus. 
  • Mist the applicator, not the vehicle, with a single spray of Paint Guard Plus. 1 spray is enough sealant to cover a surface area of 3-4 feet.
  • Apply the product in a thin, even coating over entire car.    
  • Rub in thoroughly until only a light film remains. 
  • Do not over apply the product or streaking may appear. 
  • Allow film to dry for 1 hour before touching or wiping.
  • If desired, a second coat may be applied after allowing the first coat to dry overnight.
  • If small areas of streaking are visible after 1 hour, buff area with a soft, dry buffing towel.  

Note: This product is designed for hand application only using a microfiber applicator. Do not apply when temperature is below 40 F.

Recommended Surfaces:

  • New paint surfaces   
  • Like-new paint surfaces  
  • Paint surfaces prepared with Ultima Paint Prep Plus

Contents:

  •  Ulitma Paint Guard Plus, 4 oz. 
  •  Ultima Paint Guard Applicator, 2" by 4" by 6"