CQUARTZ UK 4

Improved beading, great slickness, and extreme gloss!

CARPRO CQUARTZ UK 4 is an evolution of the most trusted ceramic coating of the past decade. Completely re-engineered to deliver improved gloss, superior dirt repellency, water beading, water spot resistance and greatly enhanced slickness, UK 4 takes everything you loved about its predecessor to the next level.

Combining advanced hybrid synthetic polymers with CARPRO’s industry-leading ceramic technology, CQUARTZ UK 4 creates an exceptionally smooth, glossy, and durable protective layer. Its upgraded formula offers greater resistance to environmental contaminants and water spotting while delivering outstanding performance with just a single coat.

Features:

• Advanced Hybrid Ceramic Formula: Combines synthetic polymers with advanced ceramic technology for enhanced performance and protection.
• Increased Slickness: Creates a smoother, slicker paint surface.
• Enhanced Gloss: Delivers a deep, glossy finish.
• Improved Water Spot Resistance: Increased resistance to water spotting and mineral deposits.
• Up to 3 Years of Durability: Provides long-lasting ceramic protection.
• Easier Application: Slower drying times provide a more forgiving installation process.
• Reduced Risk of High Spots: Extended working time helps minimize application errors.
• Professional-Level Protection: Combines advanced coating performance with user-friendly application.

Available Sizes and Kit Contents:

30 ml Kit:

• (1) 30 ml bottle of CQUARTZ UK 4
• (4) 4" x 4" Microfiber Suede Applicators
• (1) 16" x 16" Microfiber Suede Towel
• (1) CQUARTZ hologram sticker

50 ml Kit:

• (1) 50 ml bottle of CQUARTZ UK 4
• (4) 4" x 4" Microfiber Suede Applicators
• (1) 16" x 16" Microfiber Suede Towel
• (1) CQUARTZ hologram sticker

100 ml Kit:

• (1) 100 ml bottle of CQUARTZ UK 4
• (5) 4" x 4" Suede Microfiber Applicators
• (1) CQUARTZ Applicator Block
• (5) CQUARTZ hologram stickers

Specifications:

• Durability: 3+ years when maintained as directed.
• Thickness: 1~2 micron per coat.
• Coverage: 15 ml per coat +/-.
• Water contact angle: 115°.
• May be layered: A 2nd layer may be applied within 45-90 minutes of the first

Surfaces you can protect with CQUARTZ UK 4:

• Paint
• Wheels
• Plastics
• Glass
• Metals

Tips to know before you start:

• Thoroughly wash the vehicle.
• If contamination exists, Iron X and Clay your vehicle before polishing.
• For the most stunning results, thoroughly clean the entire exterior and polish the paint to a high gloss with Reflect to achieve an incredible high gloss finish in less time with no fillers. 
• Use CARPRO Eraser to remove any oils leftover after polishing - This is critical to ensure durability of CQUARTZ.
• We recommend the following coating removal towels: CARPRO 2 Face Towels or Microfiber Madness Slogger towels.
• We recommend extra suede applicators if applying more than 1 coat or car.
• Finding the right time to "level" (wipe off) excess coating after it flashes:
  • In 75F ~ 85F temps with 50% humidity we have found the sweet spot to be about 10 minutes. Your conditions may differ.
  • Start with a single panel to determine flash time before applying coating to the entire vehicle. Flash time will vary depending on temperature, humidity, air movement, paint type, how thick it is applied, and more.
  • If the coating is applied thick, then the coating will take longer to flash. If applied thin it will flash faster. Hot temps will cause it to flash faster; cold temps will cause it to flash slower. Air movement will cause it to flash faster.  
  • When it starts to flash, you will see colors that will make the coating look like a rainbow or oil slick. You will see hints of blue, purple, red, and yellow.  
  • Remove too soon, and it will be oily with no grab to it when wiping. If you wipe it off too soon, it will not give the coating a chance to bond.
  • Remove too late, and eventually it becomes hard to remove.
  • The time to remove is after it rainbows and begins to look more dry. 
  • Lighting - Lighting is key to making sure you wipe all residue off from hard-to-see areas. You don't want spot lighting like you would use on paint correction but ambient lighting. Look at the paint from different angles to make sure none of the coating is missed. Spot lighting will "wash out" the high spots visually. Think of it like this: when you wipe off a sealant, you have hours to go and check it again outside or in other lighting. In this case you need to pay attention as you go rather than wait an hour. Thorough removal of the residue is very necessary, as any product left on the surface will harden and require polishing to remove eventually.
  • High spots - A high spot is excess coating that was not leveled (wiped off). Most of the time it will look like an application mark. If you discover them a little too late, then applying a bit more product will lift them off. Eventually you would need to use a dot of finishing polish such as CARPRO Essence or Reflect and rub the high spot off, wipe it down with Eraser or your IPA of choice, and then re-coat that area and onto the area around it by about 6". Then start wiping off the perimeter immediately and slowly work inwards to feather it until you reach the area you are trying to recoat at the appropriate time. That is our technique to avoid re-polishing and coating an entire panel.

Precautions:

• Do not apply in direct sun or on a hot surface. (CQUARTZ Lite 2.0 is the best option for applications in direct sun.)
• Do not reuse 4" suede applicators.
• Do not reuse the towels you used to buff off with on paint.
• Wear hand protection.
  
• Wear respiratory protection such as a painter's mask.

Directions: 

1. If you are new to ceramic coatings, then read our "Tips" before coating.
2. Wrap a 4" microfiber suede around the black side of the applicator block or select a brand new Microfiber Applicator.
3. Shake CQUARTZ UK 4 and then point away from the face while slowly opening the cap.
4. Drag 2-3 lines of product across the applicator. 
5. Spread across paint in a criss-cross or overlapping pattern approximately 2 sq ft at a time.
6. Move to the next section and repeat steps 4 and 5. Be sure to wipe off flashed residue as soon as it has flashed off (generally 5 ~ 15 minutes depending on conditions - see "tips")
7. Flip over and switch out 4" suedes or applicator every 2+ panels or as needed if soiled.
8. CQUARTZ UK 4 performs excellent with a single coat. However, you may layer with an additional coat 45 ~ 90 minutes after you started the first coat.

Post Application Tips:

• Keep the surface dry for a bare minimum of one hour after application.
• Gently wipe any water off the surface during the first 24 hours beyond application.
• Avoid detergents and chemicals for 3 days after application.
• If you drive through bugs or have bird poop on the car, you may remove them with CARPRO Ech2O without waiting 3 days.

Coating Maintenance:

1. Use CARPRO Reset to wash regularly. Other soaps can leave residue that temporarily affects beading and allows dust and dirt to stick to the surface.
2. Wash Mitt: We recommend the Microfiber Madness Incredimitt or Delimitt
3. Drying Towel: CARPRO or Microfiber Madness.
4. Quick Detailing: CARPRO ECH2o Concentrate and Microfiber Madness Crazy Pile towels.
5. Occasionally (every 3 to 6 months) decontaminate the surface with CARPRO Iron X.  
6. If you like to top your coating, then you may use CARPRO Reload 2.0 or CARPRO EliXir as a topper every 3 months, for special occasions, or as you wish.

Shelf Life:

• *Ceramic coatings have a finite shelf life and should be installed within 12 months of purchase.

FAQ:

Q: Does this mean my beloved CQUARTZ UK 3.0 will no longer be manufactured?!  

A: No!  We strongly requested that CARPRO continue making CQUARTZ UK 3.0 for as long as any of you want to keep buying it!  So the choice is yours :)